S28i Solar Booster
S28i Solar Booster
The S28i Solar Gas Booster uses all the technological advancements of our famous INFINITY units with built-in intelligence for solar boosting. It is factory set at a temperature of 70 degrees Celsius, offers 28 I/min maximum flow rate and has status monitoring. If you're short of room on the outside of your home, this is ideal when used with either a Rinnai Sunmaster or Rinnai Prestige Solar Hot Water System.
Locate Your Nearest Store
Designed specifically for solar
Never runs out of hot water
12 Year Heat Exchanger warranty
Superior technology
- Quality Japanese design and manufacturing
- Precise temperature control for safety and convenience
- Compact design allows installation flexibility
- Suitable for higher ambient water temperatures
- Compatible with low flow rated shower fixtures (3 Star - 7.0 to 9.0 l/min)
Rinnai quality
- After sales support
- 12 year warranty on heat exchanger
| Colour | White |
| Factory Default Temperature (Celsius) | 70 |
| Water Pressure (kPa) : Minimum | 220 |
| Water Pressure (kPa) : Maximum | 1000 |
| Gas Rate (MJ) : Maximum | 210 |
| Flow Rate (l/min) : Maximum | 28 |
| Connection Sizes Gas/Hot/Cold (mm) | 20/20/20 |
| Status Monitor | Yes |
| Width (mm) | 357 |
| Depth (mm) | 245 |
| Height (mm) | 583 |
| Height inc Brackets (mm) | 648 |
| Hot Water Outlet from wall (mm) | 91 |
| Hot Water Outlet left from Centre (mm) | 110 |
| Cold Water Inlet from wall (mm) | 70 |
| Cold Water Inlet right from centre (mm) | 27 |
| Gas Connection from wall (mm) | 99 |
| Gas Connection right from centre (mm) | 89 |
| Gas Connection Length from base (mm) | 36 |
| Cold Connection Length from base (mm) | 46 |
| Hot Connection Length from base (mm) | 36 |
| Water controller compatible | No |
Note: Can NOT be used as a stand alone continuous flow water heater
