Superior Technology

• All Year-Round Comfort – full temperature control suited to your needs
• 360° Airflow Fascia – ensuring optimal air distribution and total comfort in every corner of the room
• Auto Restart Function – during a power failure the system will stop immediately. When the power returns, restart the systems and the unit will restart at the same settings
• Infrared Remote Control
• Built-in Drain Pump – cleverly engineered to ensure condensed water is drained out reliably
• Condensate drain Pump – conveniently located in a separate compartment of the indoor unit providing maximum service access
• Optional upgrades – Rinnai wired programmable thermostat / Wi-Fi allows for convenient control from anywhere with the NetHome Plus App⁺ (App available from the Apple Store or Google Play)

Rinnai Quality

• 5 year limited warranty*

Download NetHome Plus App

FAQs

• How much does it cost to run a Split System? >

  Running costs depend on the unit size, energy efficiency, electricity rates and how often it’s used.

  As a rough guide:

  • 2.5–3.5 kW unit: ~$0.60–$1.00 per hour
  • 5.0–7.0 kW unit: ~$1.00–$2.00 per hour

  Inverter Split Systems adjust their output once the room reaches temperature, which helps keep running costs down.

• What size Split System do I need? >

  The right size depends on room size, ceiling height, insulation, window size and how much sun the room gets.

  As a rule of thumb:

  • Bedrooms: 2.5–3.5 kW
  • Living areas: 5.0–7.0 kW
  • Large open-plan spaces: 8.0 kW+

  An installer can confirm with a heat load calculation.

• Are Split Systems energy efficient? >

  Yes. Modern split systems are among the most energy-efficient ways to heat and cool a home.

  Look for:

  • High star ratings (Cooling & Heating)
  • Inverter technology
  • Zoning by room (only heat/cool where needed)
• Can a Split System heat my home as well as cool it? >

  Yes. Reverse-cycle split systems both heat and cool and are very efficient, even in colder climates.

  They use electricity to move heat rather than create it, making them cheaper to run than many traditional heaters.

• What temperature should I set my air conditioner to? >

  For comfort and efficiency:
  • Cooling: 23–25°C
  • Heating: 18–20°C

  Every degree outside these ranges can significantly increase energy use.

• How long does a Split System last? >

  With proper installation and maintenance:
  • 10–15 years is typical

  Coastal or dusty environments may require more frequent servicing.

*For full warranty terms and conditions refer to the related information in Operating Manual.

⁺Rinnai uses a third-party application (App) to enhance your experience of the Rinnai product. You may use the App at your sole discretion. Please note that when you download and use the App and its services, the third-party’s privacy policy and terms and conditions of service will apply. By using the Rinnai product through this App, you acknowledge and agree that: The third-party App may collect, store, and process your personal information according to its own privacy policy and App terms and conditions. Rinnai does not control and are not responsible for the content, policies, or practices of the third-party App and its services. Rinnai strongly recommends that you review the App privacy policy before using its features. The use of the third-party App is optional. For further information or clarification, please contact us at 1300 555 545 and [email protected]

NB: Reverse cycle air-conditioners are an effective solution as they provide both cooling and heating and are highly efficient. However, unlike gas heaters, their heating capacity will reduce with colder ambient temperatures, which is especially relevant for homes in colder areas. Discuss with your installer things like the local climate, the size of your house, its orientation and construction (such as glazing, doors, insulation), and your expectations, so a system with the appropriate capacity can be selected.

The product information on this website (comprising product brochures, warranty information, installation manuals, diagrams, specifications and representations) relates to current products. This information may be different for superseded products. For superseded products please contact Rinnai to confirm product information.

Product codes: 70 - CIN070R DONSR07Z72 | 100 - CIN100R DONSR10Z72 | 120 - CIN120R DONSR12Z72 | 140 - CIN140R DONSR14Z72