Smartstart® Water Saver
Smartstart® Water Saver
Save water from going to waste
The Rinnai Smartstart® Water Saver has been developed to specifically reduce water wastage whenever a hot tap is turned on.
Locate Your Nearest Store
Water saving
Fast hot water response
Reduce ‘dead legs’, long runs of hot water piping
Features
- Allows you to pre-heat the water in the pipes before you turn on the hot tap
- Simply activated by the 'preheat' button on any Rinnai water controller or a manual control switch
- Saves tens of thousands of litres of water over the life of your hot water system
| Technical Information | Values |
| Dimensions (mm): Height / Width / Depth | 260 x 220 x 229 |
| Weight (kg) | 7.5 kg |
| Rated Pressure | 850 kPa |
| Controllers | MC91Q2A, MC601QA, MC100V, BC100V and MC503 (purchased separately) |
| Installation | External/Internal |
| Anti Frost | Standard |
| Pump Type | Centrifugal |
| Current | 0.14 Amps |
| Power Consumption | 30 Watts |
| Pump Speed | 2700 rpm |
| IP Rating | IPX4 |
Photography
