Enviroflo B Series
Enviroflo B Series
Upgrade to a more efficient Hot Water system
The Rinnai Enviroflo B Series Electric Heat Pump operates by utilising a heat exchange system that absorbs the heat from the surrounding air and uses it to heat your water. The innovative controller works to maximise hot water availability while using up to 70% less energy*, compared to a standard electric storage tank.
Combine this with the included Wi-Fi enabled Timer Function allowing you to utilise solar PV usage, and watch your energy consumption drop. These tanks have been designed and tested to operate with water pressures up to 850kPa. Best of all, they are lighter in weight to aid quick and safe installation whilst having a minimal impact on the environment.
* Energy saving of up to 70% based on a Rinnai Enviroflo 215ltr Heat Pump when compared to a standard electric water heater of the same capacity during peak winter load in Zone 1 based on AS/NZS4234. Savings will vary depending upon your location (Zone 1-5), type of water heater being replaced, hot water consumption and associated fuel tariffs.
This product does not have a replacement product.
High Energy Efficiency
Perfect for replacing an electric storage tank
Big Performance
Available in 215L
Enviroflo B Series
- Energy Efficient
- Big Performance
- Convenient Wi-Fi Timer
- Reliable
- Auto Disinfection
- Environmentally Focused
- Defrost Control
- Adaptable for All Climates
| Rinnai – Enviroflo B Series Heat Pump | ||
| Noise | 46 dB(A) | |
| Ambient Temperature Limits (for heat pump operation – element will operate beyond these limits) | -7°C – 43°C | |
| Ingress Protection | IP24 | |
| Storage Cylinder – Hot Outlet and Cold inlet Connections | ISO 7.1 ¾” RP | |
| Storage Cylinder – PTR Valve Connection | ISO 7.1 ¾” RP | |
| PTR Setting | 850 kPa / 46 kW | |
| ECV Fitted | Fit PLV if mains pressure exceeds | 680 kPa |
| Recommended PLV pressure rating | 500 kPa | |
| ECV Not Fitted | Fit PLV if mains pressure exceeds | 800 kPa |
| Recommended PLV pressure rating | 500 kPa | |
| Rated Input Electric Element (Factory Wired) | 2.1 kW | |
| Maximum Input Refrigeration Module (Factory Wired) | 1.1 kW | |
| Total Maximum Input | 2.1 kW | |
| Maximum Energy Output | 4.5 kW | |
| Power Supply | 220 – 240 V AC, 50Hz | |
| Maximum Current | 10 Amps | |
| (15 Amp plug fitted) | ||
| Refrigerant Type / Mass | R290 / 380 g | |
| COP (32.6°C Ambient 21.1°C cold water inlet) | 7.6 | |
| Heat Pump heating capacity (32.6°C Ambient 21.1°C cold water inlet) | 3.6 kW | |
