Smartstart® Water Saver
Smartstart® Water Saver
Save water from going to waste.
The Rinnai Smartstart® Water Saver has been developed to specifically reduce water wastage whenever a hot tap is turned on.
Locate Your Nearest Store
Water saving
Fast hot water response
Reduce ‘dead legs’, long runs of hot water piping
- Allows you to pre-heat the water in the pipes before you turn on the hot tap
- Simply activated by the 'preheat' button on any Rinnai water controller or a manual control switch
- Saves tens of thousands of litres of water over the life of your hot water system
|
Dimensions (mm) : Height |
260 |
|
Dimensions (mm) : Width |
220 |
|
Dimensions (mm) : Depth |
229 |
|
Weight (kg) |
7.5 kg |
|
Rated Pressure |
850 kPa |
|
Controllers |
MC91Q2A, MC601QA, MC100V, BC100V and MC503 (purchased separately) |
|
Installation |
External/Internal |
|
Anti Frost |
Standard |
|
Pump Type |
Centrifugal |
|
Current |
0.14 Amps |
|
Power Consumption |
30 Watts |
|
Pump Speed |
2700 rpm |
|
IP Rating |
IPX4 |
Photography
